A secant pile wall consists of overlapping (secant) piles to form structural or cutoff walls and achieve the required water tightness. The design can incorporate steel bar or beams for reinforcement and anchors can provide additional lateral support, if needed.

Common uses

Slope stabilisation
Enable and support excavations
Support bulkheads
Water cut off


Secant pile walls consist of reinforced and non-reinforced piles. The reinforcement can be provided by installing reinforcement cages, steel channel sections, I-beams or H-beams.

Secant pile walls retained by anchors or strutting system are often supported by a waler beam to distribute the loads (prevent punching of anchor/strut through the pile) and as a mitigation measure for the unlikely event of an anchor/strut not carrying the load. This waler beam can be constructed as a reinforced concrete beam casted towards the pile wall, or by using steel profiles to be fixed to the piles and anchors/strutting systems.


Can be constructed in a wide variety of soil conditions, including through cobbles and boulders
Very little deformation and settlement on the outside
Can carry high loads from surrounding structures
Less vibration during construction

Quality assurance

We use the latest technology, testing regimes and best practices protocols developed over many years to ensure the position, verticality and structural integrity of our pile walls.